To edit ads that are shown on the wall, log in to the Cloud Service (https://cloud.valomotion.com), go to the unit page and click “Edit” in the ads section title.
Ads can be enabled, disabled or shown in this view. A disabled ad will not be displayed on the wall.
Use the “Add” button to add a new ad.
- Supported types for an ad file are: jpg, png, mov, mp4, ogv and avi.
- The maximum size of an ad is 20Mb.
- A brief length (under 5 seconds) is recommended for video ads.
- Recommended resolution for ValoClimb ads is 1024x768
- Recommended resolution for ValoJump ads is 1920x1080
Showing ads between games (ValoClimb)
By default, the unit will show ads between games, but this can be disable so that the ads will only show when the unit has been idle and entered the screen saver mode.
If you want to disable ads between games, this can be done via the settings menu on the touch screen of the unit ("Enable ads between games" checkbox).
Changing screen saver timer (ValoClimb)
You can also adjust how long it takes for the unit to enter the screen saver mode. By default the unit will enter screen saver mode when it has been idle for 3 minutes, but this can be adjusted via the settings menu on the units touch screen (see image above).
Ads on ValoJump
On a ValoJump unit the ads work in the following way:
Image ads - Image ads will be displayed on the touch screen only, when it is in idle mode. The touch screen goes in to idle mode after not being used for 30 seconds.
Video ads - Video ads will play on both the touch screen and the main monitor, but only when the unit is idle. The main monitor is in idle mode always when there is no one playing. The touch screen goes in to idle mode after not being used for 30 seconds.